China Solid Tires for Skid Steer Loaders - Quality Suppliers from Yantai WonRay Rubber Factory
PRODUCTS DESCRIPTION
For skid steer loaders, two distinct tread patterns have been designed to suit different operating environments: the R708 and R711.
Solid tires are off-road tires (OFF THE ROAD), usually limited to a maximum speed of 25Km/h. As a solid tire for skid steer loaders, our company has designed two different patterns according to the different operating environments, namely R708 and R711. The structures of the two patterns are different and their applicable occasions are also different. R708 is suitable for ordinary sand roads. , R711 is suitable for hard and rough road surfaces and operating environments, such as mines, underground mines, and waste treatment plants.
Both 10-16.5 and 12-16.5 have two structural forms, namely pneumatic tire type solid tire and bonded solid tire. Both forms adopt the design of sidewall holes, which not only increases the shock absorption performance of solid tires , has improved its heat dissipation performance. Pneumatic tire-type solid tires need to be installed with rims. If the original vehicle is equipped with pneumatic tires of these two specifications, their rims are one-piece and cannot be installed with solid tires. Therefore, vehicles using 10-16.5 and 12-16.5 pneumatic tires need to replace the rims when changing solid tires! The rims that are usually replaced are not the common two-piece split rims, but two- or three-piece flat-bottomed rims with locking rings, 6.00-16 and 8.00-20, respectively. Bonded 10-16.5 and 12-16.5 are steel rims customized according to the installation data of the vehicle. Through advanced processing technology, the rubber is bonded to the surface of the steel rim. The stability and safety of the tire are good, no need to press-fit, directly Easy to install and use.
PRODUCTS SPECIFICATIONS
| No. | Size of Tire | Rim Size | Pattern No. | Outside Diameter | Section Width | Net Weight(Kg) | Max Load (Kg) |
| Other Industrial Vehicles | |||||||
| ±5mm | ±5mm | ±1.5%kg | 25km/h | ||||
| 1 | 10x16.5 （30x10-16） | 6.00-16 | R708/R711 | 788 | 250 | 80/88.5 | 3330 |
| 2 | 12x16.5 （33x12-20） | 7.50/8.00-20 | R708/R711 | 840 | 275 | 91/103 | 4050 |
| 3 | 16/70-20（14-17.5 ） | 8.50/11.00-20 | R708 | 940 | 330 | 163 | 5930 |
| 4 | 38.5x14-20（14x17.5,385/65D-19.5） | 11.00-20 | R708 | 966 | 350 | 171 | 6360 |
| 5 | 385/65-24（385/65-22.5） | 10.00-24 | R708 | 1062 | 356 | 208 | 6650 |
| 6 | 445/65-24（445/65-22.5） | 12.00-24 | R708 | 1152 | 428 | 312 | 9030 |
APPLICATION
Frequently Asked Questions
What are the main differences between the R708 and R711 tread patterns?
The R708 tread pattern is optimized for sandy and loose surfaces with excellent self-cleaning properties to prevent mud accumulation. The R711 pattern is designed for hard, rough surfaces like mines, underground operations, and scrap yards, offering high resistance to cuts, tears, and wear.
What is the maximum speed limit for these solid skid steer tires?
These solid tires are off-road tires (OTR) and are usually limited to a maximum operating speed of 25Km/h.
Why do these solid tires feature sidewall holes?
The design of sidewall holes in both pneumatic tire-type and bonded solid tires increases the shock absorption performance and improves heat dissipation during operation.
Do I need to replace my rims when switching from pneumatic to solid tires?
Yes. Original one-piece rims for 10-16.5 and 12-16.5 pneumatic tires cannot fit solid tires. You must replace them with flat-bottomed rims with locking rings (6.00-16 or 8.00-20) when changing to pneumatic-type solid tires.
What are the advantages of bonded solid tires?
Bonded solid tires use custom steel rims where the rubber is directly bonded to the rim surface. This structure provides excellent stability and safety, requires no press-fitting, and is easy to install and use directly.